/ By Kem Kep / 0 Comments

Mertin Exterior Linear CTC Graze

FEATURES

  • Three beam angle options – including narrow for impressive graze effects.
  • Very low power consumption (max 20 W/ft).
  • No extra control boxes required – connects directly to line voltage and DMX.
  • Internal power and control (DMX, RDM and magnetic tool).
  • Super rugged IP66 housing.
  • 0–100% intensity control.

The Exterior™ Linears are a series of LED color changing fixtures in a robust outdoor-rated housing. The Exterior Linear fixtures provide high output and are available in both cove and graze light versions.

The Exterior™  Linear 1220 Graze CTC and the Exterior™ Linear 320 Graze CTC are designed to illuminate walls or any type of linear structure and feature precise color temperature control from 2700K to 6500K and uniform light distribution at three different beam angles, ideal for highlighting textured surfaces.

The Exterior Linear fixtures are DMX controllable, easy to install due to their integrated universal power supply and connect via daisy chain using a combined power and data connector.

SPECIFICATIONS

  • PHYSICAL320 series (1 ft.) fixtures:Length: 305 mm (12.0 in.)
    Width: 72 mm (2.8 in.)
    Height: 99 mm (3.9 in.) including bracket
    Weight: 1.5 kg (3.4 lbs.)

    1220 series (4 ft.) fixtures:Length: 1219 mm (48.0 in.)
    Width: 72 mm (2.8 in.)
    Height: 99 mm (3.9 in.) including bracket
    Weight: 6.0 kg (13.3 lbs.)

    DYNAMIC EFFECTSColor temperature control: 2700 K – 6500 KIntensity: 0 – 100%
    CONTROL AND PROGRAMMINGControl systems: DMX, RDMControl resolution: 8-bit DMX control of each colorUser interface: Magnetic button to call up fixture status and test fixtureDMX channels: 2 – 16 depending on model and modeDMX compliance: USITT DMX512/1990 RDMRDM compliance: ANSI/ESTA E1.20
    OPTICSLight source: 3 W Cree XP-E2 LEDsBeam angle: 120°Beam angle variants:Narrow: 12°
    Medium: 17°
    Wide: 70°
    Asymmetric: 70° x 12.5°

    Minimum LED lifetime: 50,000 hours (to >70% luminous output)**Figure obtained under test conditions

    PHOTOMETRIC DATAExterior Linear 320 Graze (Medium):Total luminous output: 1100 lumens
    Warm white output: 270 lumens
    Cold white output: 440 lumens

    Exterior Linear 1220 Graze (Medium):Total luminous output: 4400 lumens
    Warm white output: 1080 lumens
    Cold white output: 1760 lumens

    CONSTRUCTIONHousing: AluminumFront: Clear polycarbonateProtection rating: IP66IK rating: IK08Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)    RoHS compliant
    INSTALLATIONOrientation: AnyMinimum distance to illuminated surfaces: 0.1 m (0.3 ft.)
  • CONNECTIONSPower/data in/thru: 8-pin custom connectors
    ELECTRICALAC power: 100 -277 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch-modeMaximum total length of fixtures in chain at 120 V: 15.24 meters (50 ft.)Maximum total length of fixtures in chain at 240 V: 30.48 m (100 ft.)Typical half-cycle RMS inrush current: 0.3 A, 1220 models 0.7 ASurge protection: 4 KV
    TYPICAL POWER AND CURRENT100-240 V, 50/60 Hz: 20 W per foot +/- 1 W, PF 0.95 +/- 0.05277 V, 50/60 Hz: 20 W per foot +/- 1 W, PF 0.90 +/- 0.05Power figures are typical, not maximum. Measurements made at nominal voltage. Allow for +/- 10% deviation. PF = Power factor.
    THERMALCooling: ConvectionMaximum ambient temperature (Ta max.): 45° C (113° F)Minimum ambient temperature (Ta min.): -30° C (-22° F)Total heat dissipation (calculated, +/- 10%): 70 BTU/hr. per foot
    APPROVALSEU safety: EN 60598-2-5, EN 60598-2-1, (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55032 (EN 55103-1), EN 55103-2, EN 61547, EN 61000-3-2, EN 61000-3-3US safety: ANSI/UL 1598US EMC: 47 CFR Part 15 Class BCanadian safety: CSA C22.2 No. 250.0Australia/NZ: RCMGlobal CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
    ACCESSORIESMagnetic Test Tool, set of 10: P/N 91610139Cables:Power + Data Input Cable with 8-pin custom connector, 2 m (6.6 ft.), EU: P/N 91611754
    Power + Data Input Cable with 8-pin custom connector, 2 m (6.6 ft.), US: P/N 91611755
    Power + Data Input Cable with 8-pin custom connector, 10 m (32.8 ft.), EU: P/N 91611156
    Power + Data Input Cable with 8-pin custom connector, 10 m (32.8 ft.), US: P/N 91611157
    Power + Data Extension Cable with 8-pin custom connectors, 0.2 m (0.7 ft.), EU: P/N 91611758
    Power + Data Extension Cable with 8-pin custom connectors, 0.2 m (0.7 ft.), US: P/N 91611759
    Power + Data Extension Cable with 8-pin custom connectors, 1 m (3.3 ft.), EU: P/N 91611760
    Power + Data Extension Cable with 8-pin custom connectors, 1 m (3.3 ft.), US: P/N 91611761
    Power + Data Extension Cable with 8-pin custom connectors, 5 m (16.4 ft.), EU: P/N 91611762
    Power + Data Extension Cable with 8-pin custom connectors, 5 m (16.4 ft.), US: P/N 91611763
    Power + Data Extension Cable with 8-pin custom connectors, 10 m (32.8 ft.), EU: P/N 91611764
    Power + Data Extension Cable with 8-pin custom connectors, 10 m (32.8 ft.), US: P/N 91611765
    End Termination Cap for power + data link: P/N 91611766

    Optical:Exterior Linear 300 Series Glare Shield, set of 4: P/N 91611752
    Exterior Linear 1200 Series Glare Shield, set of 4: P/N 91611753

    RELATED ITEMSMartin™ RDM 5.5 Splitter: P/N 90758150Martin Companion Cable: P/N 91616091Martin Companion Software Suite (including firmware uploader)
    ORDERING INFORMATIONExterior Linear 320 CTC Graze:Exterior Linear 320 CTC Graze, Narrow: P/N 90356988
    Exterior Linear 320 CTC Graze, Medium: P/N 90356975
    Exterior Linear 320 CTC Graze, Wide: P/N 90356974
    Exterior Linear 320 CTC Graze, Asymmetric: P/N 90356973

    Exterior Linear 1220 CTC Graze:Exterior Linear 1220 CTC Graze, Narrow: P/N 90356989
    Exterior Linear 1220 CTC Graze, Medium: P/N 90356985
    Exterior Linear 1220 CTC Graze, Wide: P/N 90356984
    Exterior Linear 1220 CTC Graze, Asymmetric: P/N 90356983

Comments for this post are closed.